Jet 708309 JWS-25X Shaper 3HP 1PH
The Jet 708309 JWS-25X Shaper 3HP 1PH is an ideal shaper for woodworkers. It comes with a 3HP motor which continuously deploy the best power levels when shaping small to large work pieces. The motor is also assisted by the v-belt for efficient transferring of the power to the spindle. Even with its dependable motor, you can still adjust the speed and torque with the shaper's two speed settings. Precise positioning is also straightforward because the fences are adjustable and the micro adjust control. The spindle's height is also controllable thanks to the handwheel feature. The Jet 708309 JWS-25X Shaper 3HP 1PH aiso have spindle lock, starting pins, two hold-downs and large working area.
Spindle Speed (RPM) | 7,500, 10,000 |
Maximum Spindle Diameter (In.) | 1/2, 3/4 |
Spindles Included | No |
Spindle Size Under Nut (In.) | 1/2 (2-13/64), 3/4 (3-3/16) |
Spindle Travel (In.) | 3-1/2 |
Reversible | Yes |
Router Bit Collet Included | 1/4, 1/2 |
Maximum Diameter Cutter Above Table (In.) | 7 |
Maximum Diameter Cutter Below Table (In.) | 6 |
Table Opening Diameter (In.) | 6-9/32 |
Table Inserts (In.) | 2 |
Table Insert Opening Diameter (In.) | 2-9/16, 4-21/64 |
Table Size (L x W) (In.) | 25 x 25-1/2 |
Table T-Slot (In.) | 3/4 x 3/8 |
Table Height from Floor (In.) | 33 |
Fence Size (L x H) (In.) | 14-1/2 x 4-3/4 |
Fence Travel (Major and Minor) (In.) | 4-1/4, 15/16 |
Dust Port Outside Diameter (In.) | 4 |
Dust Collection Minimum CFM Required (CFM) | 350 |
Electrical Controls | Yes |
Motor Power (HP) | 3 |
Motor Phase | 1 |
Motor Voltage (V.) | 230 |
Prewired Voltage (V.) | 230 |
Motor Current (Amps.) | 16 |