SCM K 600 ERT Single Sided Edgebander

The K 600 ERT is an automatic single sided edgebander designed to be used for straight vertical profiles with coiled material some examples being veneer and PVC, and with strips of high-pressure laminate and solid wood, with a maximum thickness of 8mm. 

Capacities And Speed

• Edgebanding thickness: .4mm - 8mm (.016-5/16")
• Guillotine capacity: 3mm
• Feed speed: 36/52 ft/min
• Panel height: 3/8" min - 23/8" max
• Minimum panel length: 5 1/2"
• Minimum panel width: 2"
• Minimum distance between panels: 24"

It comes equipped with the new "Startouch" controller. It features a 12" touch screen display, capable of storing 100 programs, 6 at the touch of a single key. Color graphic display of all the working units. It also tracks production information, diagnostic information and monitors maintenance schedules. It also make for easy use being able to swivel 270 degrees with the ability to display mm or inches as well as up to 5 different languages.

All operating units raise and lower simultaneously when the pressure beam is adjusted. No adjustment is required for the glue roller when changing panel thickness. The pressure beam has two rows of staggered pressure rollers with steel bearings.

There are three total pressure rollers,two idle rollers canted one degree for extra pressure along the glue line and one Teflon coated driven roller. Warm up time is approximately 8 to 10 minutes. The glue pot unit is also equipped with a quick disconnect plug and quick change for changing from one pot to another, change out time is less than a minute. An automatic temperature kickdown feature extends glue life and prevents glue scorching.