The Leadermac U Power 9 inch, 6 head moulder includes new angled quick-set top head chipbreakers, pressure plates, Quik-Set 4" axial adjustment to the side heads, SmartSet touch screen controls and sets system, top and side heads, radial setworks, and side heads axial setworks.
Main Frame, Machine Bed and Enclosure
- 1 Piece - extra heavy duty main frame. Specially heat treated for maximum stability and minimum vibration.
- 78 inch (2 meter) long Adjustable Infeed Table and Fence (each adjustable .4 inch)
- All Tables and Fences are Hard Chromed approx. .012”-.014” Chrome Thickness
- Lift up sound and safety Enclosure including safety interlocks and good Strobe-Free lighting inside the enclosure
Drive Includes
- Maintenance free Full Cardan Shaft Drive to feedworks for balanced drive performance, with individual worm reduction gear box to each feed roll station
- Powered rise and fall to extra heavy feed support beam by 3/4 hp/.55 kw motor
- Upper support Beam is supported at both the Infeed and Outfeed ends on 2 large columns for best, most rigid upper beam support
- All feed rolls and pressures move with top beam rise and fall, including safety switches at extreme points
- 9 Top Driven Feed Roll Assemblies (each equipped with Multiple 2” wide rolls that can be quickly spaced/positioned or removed as desired)
- 3 driven Full width Bed(Bottom) Rolls
- Top infeed rolls before first bottom head with pneumatic rise and fall by switch
- Centrally located Pneumatic Pressure Gauges & Controls for Top Rolls, Chip Breakers and Roll holdover Assembly opposite rear side head on Exterior Column
- All Top Rolls are Pneumatically Tensioned. There are 3 different pressurized groups to the Top Rolls. Infeed, Midfeed & Outfeed Top Rolls. Each group has a pressure gauge and regulator for varying pressure setting. This really helps for the feeding of different materials with different conditions, smoothly and efficiently
- All Infeed Top Rolls are Hardened, Serrated and Satin Chromed to resist wear and prevent chips and shavings from sticking to them
- Top feed rolls after top head are Polyurethane
- 2 Piece Full width Bottom Driven Infeed Roll
- Intermediate short stock top driven feed roll station with pneumatic pressure for feeding minimum 8”(200mm) length work pieces. It is easily flipped up for rear side head removal.
- Top/Bottom Powered Outfeed Rolls, with bottom full width and plain
- Inch forward and reverse to feed with duplicate control at top head position for fast and easy setting
- Feed roll diameter 5.5” / 140mm
- 5HP VFD Electronic Infinitely Variable Feed Drive 20 – 120 fpm including Inverter Duty
Feed motor with Brake module and Digital Speed Readout on the Control
Head Configuration
| Cutterhead | HP | Cutterhead Swing | Hood Size |
|---|
| 1st Bottom Head | 15 HP | 4.9" to 6.3" (125 - 160 mm) | 4.9" (125 mm) |
| Right Side Head | 10 HP | 4.9" to 8.5" (125 - 215 mm) | 4.9" (125 mm) |
| Left Side Head | 15 HP | 4.9" to 8.5" (125 - 215 mm) | 4.9" (125 mm) |
| 1st Top Head | 20 HP | 4.9" to 8.5" (125 - 215 mm) | 4.9" (125 mm) |
| 2nd Top Head | 25 HP | 4.9" to 8.5" (125 - 215 mm) | 4.9" (125 mm) |
| 2nd Bottom Head | 20 HP | 4.9" to 8.5" (125 - 215 mm) | 4.9" (125 mm) |
