The two-axis automatic mill cutter with TouchScreen numerical control is designed to indent dovetails and parallel indents for drawers and several furniture elements. The 750CN is capable of producing English, French*, and through dovetails. Equipped with a spindle and a mill cutter that allow the production of indents of different heights and spacing. The machine is designed to cut single male or female workpieces, or both simultaneously. Pieces can be clamped and released in manual mode by means of pneumatic valves. Controls are issued from a numerically controlled TouchScreen interface.
The machine is controlled by a numerical control system that is programmed to guarantee the utmost machining flexibility and to change the machining limits within the vollowing variables:
Pitch of indents
Number of indents
Depth of indents
Dimensions of the pieces
Cutting speed and tool feeding
compensation of the tool radius variation
All the adjustments can be easily carried out following the software instructions of the machine displayed on the monitor.
On board machine installed power: 2.7 kw
Working Pressure: 0.7 MPascal
Spindles: 1 n deg
Spindle Revolutions: 18,000 RPM
Center to center of indents: variable or fixed mm
Drawers production: 60 boxes/h
Machine Weight: 360 kg
Shipping Weight: 410 kg
Dimensional Limits of Workpieces:
Length: 7.87 in (200 mm)
Width: 2.36 in (60 mm)
Indent Height: .23 in (6 mm)
Front Thickness: .31 in (8 mm)
Side Thickness: .31 in (8 mm)
Length: 59.05 in (1500 mm)
Width: 20.86 in (530 mm)
Indent Height: .78 in (20 mm)
Front Thickness: 1.96 in (50 mm)
Side Thickness: 1.57 in (40 mm)
This machine is supplied with the following components:
Integral Widia cutter installed
Tool Kit for adjustments and maintenance
User's and instruction manual.
Safety Standards Compliance
The machine is designed and built according to EC Safety Standards.
*French dovetail production requires an optional software upgrade.