Powermatic 16" Jointer with Helical Control Head
If you want a jointer that won’t give up on you even when used for extended period of time, the Powermatic 16 inch Jointer with Helical Control Head is extremely dependable. This sander has a 7.5 motor which means it can provide plenty of power for any task. Even with its amazing power, the Powermatic 16 inch Jointer with Helical Control Head will operate silently because of its helical cutterhead. The cutterhead also removes frequent machine adjustments and rapids knife changes. This jointer also offers trouble-free fence positioning and work support because of large work surface and fence system
Number of Knives | 58 |
Standard Knife Size (L x W x T) (In.) | 30 x 12 x 2 |
Cuts Per Minute | 20,800 |
Cutterhead Diameter (In.) | 4 |
Cutterhead Speed (RPM) | 5,200 |
Cutting Capacity (W x D) (In.) | 16 x 3/4 |
Table Size (L x W) (In.) | 96 x 16 |
Table Height from Floor (In.) | 37-1/2 |
Infeed Table Length (In.) | 47-1/2 |
Outfeed Table Length (In.) | 47-1/4 |
Rabbeting Capacity (In.) | æ " |
Rabbeting Ledge (In.) | 5 x 24-1/2 |
Fence Size (L x H) (In.) | 47-1/4 x 5-1/4 |
Fence Tilt (Deg.) | 45 In/Out |
Fence Positive Stops (Deg.) | -45, 45, 90 |
Dust Collection Minimum CFM Required (CFM) | 800 |
Dust Port Outside Diameter (In.) | 6 |
Motor Power (HP) | 7-1/2 |
Motor Phase | 3 |
Motor Voltage (V.) | 230, 460 |
Prewired Voltage (V.) | 230 |