Powermatic OES9138 Oscillating Edge Sander
This sander will become one of your favorite machines. Known as the Powermatic OES9138, it can bring you exceptional better finishes with its oscillating edge sander. It can even easily accommodate large pieces because of its extra large table. You won't experience belt overheating for production sanding because the cast iron platen is wrapped with graphite. In fact, a trouble-free sanding performance is guaranteed because of the head pivots which comes with 2 sealed ball bearing. To make sure that this sander will always give the best oscillation action, it is installed with a 3HP motor. More features of the : Powermatic OES9138 can seen below:
- Cleaner area and longer abrasive belt with its two dust ports
- Endless sanding possibility with the hinge guard feature
- Faster belt changes with the tensioning device
- Pedestal control
- Front work table is large, can be tilted and with miter head
- Idler pully and drive drum
- Work at an angle or height needed with the large table
| Style (Type) | Horizontal/Vertical Oscillating Edge |
| Sanding Belt Size (L x W) (In.) | 9 x 138-3/4 |
| Belt Speed (FPM) | 3542 |
| Drum Diameter (In.) | 4 Outboard, 9 Drive |
| Platen Size (In.) | 9-1/2 x 48 |
| Oscillations Per Minute | 24 |
| Main Table Size (L x W) (In.) | 48 x 11-3/4 |
| Main Table Tilt (Deg.) | 5 In, 45 Out |
| Table Height from Floor (In.) | 34-1/2 - 40-3/4 |
| End Table Size (In.) | 18 |
| End Table Tilt (Deg.) | 40 ∞ in, 45 ∞ out |
| Electrical Controls | Magnetic Starter |
| Dust Collection Minimum CFM Required (CFM) | 1,100 |
| Dust Port Outside Diameter (In.) | 4 |
| Motor Power (HP) | 3 |
| Motor Phase | 1 |
| Motor Voltage (V.) | 230 |