Powermatic OES9138 Oscillating Edge Sander
The Powermatic OES9138 is a marvelous oscillating edge sander to use even for demanding work pieces. This is because it includes sander features that are beyond more reliable and efficient than other sanders. Its dependable oscillating operation is powered by a 3HP motor. The Powermatic OES9138 efficiently oscillates at 24 cycles per 60 seconds or 1 minute to improve the belt’s life and produce better finish. With this sander, you can even sand more work surface area because of its platen which consist of a graphite pad. This feature also helps improve the belt’s life because it runs cooler and provides support.
- Quick belt changes and tracking due to the tensioning device which is bearing assisted
- Front worktable is large can vertically travel and tilt
- Positive drive and tracking with the drive drum and pulley
- The radius of the end table is large
- Includes gearbox and shaft
- Endless length sanding with its hinged guard
- Dust ports
Style (Type) | Horizontal/Vertical Oscillating Edge |
Sanding Belt Size (L x W) (In.) | 9 x 138-3/4 |
Belt Speed (FPM) | 3542 |
Drum Diameter (In.) | 4 Outboard, 9 Drive |
Platen Size (In.) | 9-1/2 x 48 |
Oscillations Per Minute | 24 |
Main Table Size (L x W) (In.) | 48 x 11-3/4 |
Main Table Tilt (Deg.) | 5 In, 45 Out |
Table Height from Floor (In.) | 34-1/2 - 40-3/4 |
End Table Size (In.) | 18 |
End Table Tilt (Deg.) | 40 ∞ in, 45 ∞ out |
Electrical Controls | Magnetic Starter |
Dust Collection Minimum CFM Required (CFM) | 1,100 |
Dust Port Outside Diameter (In.) | 4 |
Motor Power (HP) | 3 |
Motor Phase | 3 |
Motor Voltage (V.) | 230 |
Prewired Voltage (V.) | 230 |