Powermatic 2HP 8" Parallelogram Jointer w/ Helical Head
The Powermatic 2HP with helical head is truly a valuable jointer for a woodworking shop. This tough equipment offers the best performance by integrating it with innovative jointer features. One of its excellent features is its cutterhead in a helical design which also includes 54 four-sided knife inserts. This feature provides you with a superior finish and quiet cutting operation. The Powermatic 2HP with helical head also has a longer bed so you can comfortably work on your project. In fact, this jointer has a parallelogram design to keep the table near the cutterhead, allowing quicker set of the depth and have a quality finish. A single handwheel will immediately tilt the fence to an angle. To keep the [name] parallel and free from scratches, it includes a non-mar insert and enclosed heavy steel stand.
| Number of Knives | 54 |
| Standard Knife Size (L x W x T) (In.) | 59/100 x 59/100 x 1/10 |
| Cutterhead Diameter (In.) | 3-1/16 |
| Cutterhead Speed (RPM) | 7,000 |
| Cutting Capacity (W x D) (In.) | 8 x 1/2 |
| Table Size (L x W) (In.) | 82 x 8 |
| Table Height from Floor (In.) | 31-5/16 |
| Infeed Table Length (In.) | 44 |
| Outfeed Table Length (In.) | 38 |
| Fence Size (L x H) (In.) | 44-3/4 x 38-3/16 |
| Fence Tilt (Deg.) | 45 |
| Fence Positive Stops (Deg.) | -45, 45, 90 |
| Dust Collection Minimum CFM Required (CFM) | 450 |
| Dust Port Outside Diameter (In.) | 4 |
| Motor Power (HP) | 2 |
| Motor Phase | 1 |
| Motor Voltage (V.) | 230 |
| Motor Current (Amps) | 3/8 |