Powermatic Model TS29 7-1/2HP, 3Ph w/ Sliding Table
The Powermatic Model TS29 is an exemplary shaper a woodworker should possess in his shop. This shaper can provide you all you need to finish any shaping job. Its new fence design consists of features like the revolutionary dual digital readouts. For more accurate shaping set-up, it also has an adjustable fence and extremely useful micrometer adjustments. Stock hold downs and a clear cover are featured as well so you can quickly change tools. You will find two dust ports, one in the guard and other under the table, to guarantee a dust-free working area. Its spindle comes with five variable speed in both forward and reverse modes. The table is large and comes with a built-in slider which has ample room for your stock feeder. The table is also installed with four foot stroke. In addition, a miter head is included in the sliding table.
| Style (Type) | Shaper |
| Spindle Speed (RPM) | 3,000, 4,000, 6,000, 8,000, 10,000 |
| Maximum Spindle Diameter (In.) | 1-1/4 |
| Spindle Size Under Nut (In.) | 3/4 (3-1/2), 1 (6-1/4), 1-1/4 (6-1/4) |
| Spindle Travel (In.) | 7 |
| Reversible | Yes |
| Router Bit Collet Included | 1/4, 1/2 |
| Maximum Diameter Cutter Above Table (In.) | 12 |
| Maximum Diameter Cutter Below Table (In.) | 9 |
| Table Inserts (In.) | 3: One Tilting, Two Straight |
| Table Size (In.) | 51-1/2 x 33-1/2 |
| Table Travel (In.) | 49-1/4 |
| Sliding Table Size (In.) | 11-1/4 x 51-1/4 |
| Fence Size (L x H) (In.) | 46 x 5 |
| Fence Travel (Major and Minor) (In.) | 5-3/8, 3-5/8 |
| Dust Port Outside Diameter (In.) | 5 |
| Dust Collection Minimum CFM Required (CFM) | 800 |
| Electrical Controls | Yes |
| Motor Power (HP) | 7-1/2 |
| Motor Phase | 3 |
| Motor Voltage (V.) | 230, 460 |
| Prewired Voltage (V.) | 230 |