Sliding headstock with electronic variable speed and digital RPM readout for accurate speed adjustments
Spindle lock and built in spindle indexing on the headstock for drilling hole patterns, routing flutes, and other equally spaced features
Redesigned tool rest geometry allows for better chisel movement along the tool rest
Laser etched quill is self-ejecting.
Brass tipped knockout bar concentrates the action in the sliding handle; the brass tip will not damage drive centers
Attached tool caddy allows convenient access to centers, wrenches, etc.
Tailstock has internal storage for additional accessories
Chrome trimmed handwheels are ergonomic for a comfortable feel
Standard Equipment:
2HP TEFC Motor
Safety shield
3" face plate and face plate wrench
14" tool rest
Multiple ball-bearing live center
Brass tipped knockout rod
Spindle lock and built in spindle indexing on the headstock for drilling hole patterns, routing flutes, and other equally spaced features
Redesigned tool rest geometry allows for better chisel movement along the tool rest
Laser etched quill is self-ejecting.
Brass tipped knockout bar concentrates the action in the sliding handle; the brass tip will not damage drive centers
Attached tool caddy allows convenient access to centers, wrenches, etc.
Tailstock has internal storage for additional accessories
Chrome trimmed handwheels are ergonomic for a comfortable feel
Standard Equipment:
2HP TEFC Motor
Safety shield
3" face plate and face plate wrench
14" tool rest
Multiple ball-bearing live center
Brass tipped knockout rod
| Swing Over Bed (In.) | 20 |
| Swing Over Tool Rest Base (In.) | 17 |
| Distance Between Centers (In.) | 20 |
| Headstock Movement | Full Length of Bed |
| Spingle Bore | 5/8 |
| Tailstock Bore | 3/8 |
| Spindle Taper | MT-2 |
| Quill Taper | MT-2 |
| Ram Travel Quill Travel | 4-1/2 |
| Spindle Threads (In x TPI) | 1-1/4 x 8 |
| Outboard External Threads (In. x TPI) | 1-3/16-18 UNC |
| Spindle Speeds | High 125-3200/Low 50-1200 |
| Speed Range | 50-3200 |
| Number of Indexing Positions | 48 |
| Centerline of Spindle to Floor (in.) | 44 (adjustable) |
| Outboard Turning | 88 |
| Bed Construction | Cast Iron |
| Motor Power (HP) | 2 |
| Motor Power | 3 |
| Motor Voltage | 230 only |
| Wiring Remarks | VFD will accept 1 or 3 phase power |
| Motor Current(Amps) | 6.2 |
| Recommended Circuit Size (Amps) | 20 |