Powermatic Shaper Model PM2700, 5HP, 1Ph DRO, Casters
Do you need a machine for shaping applications? You should consider Powermatic Shaper Model PM2700, 5HP, 1Ph DRO, Casters as your new shaper.This shaper is unlike any other devices because it comes with way more shaping features. Its cast iron table with miter gauge has a larger measurement to provide you with more area to work on. For shaping efficiency, it includes a versatile fence which gives you full-control to put it in the position you want. You can also adjust the height of the spindle by using the digital readout. A 5HP motor powers the machine for nonstop shaping. This shaper may be loaded with the best shaping features, it is still movable and even transportable beacuse of the caster system.
- Tabletop is highly-efficient
- Adjust the speed with ease due to the lock belt tensioning
- Heavy-duty fence with dials
- Two speed options for the spindle
- Cutter guard for safety
- Convenient feeder mounting as the table is tapped and predrilled
- Port for dust collector
Style (Type) | Shaper |
Spindle Speed (RPM) | 7,500, 10,000 |
Maximum Spindle Diameter (In.) | 1-1/4 |
Spindle Size Under Nut (In.) | 3/4 (3 3/4), 1-1/4 (5.15) |
Spindle Travel (In.) | 4 |
Spindle Tilt (Deg.) | N.A. |
Reversible | Yes |
Table Opening Diameter (In.) | 7-3/8 |
Table Inserts (In.) | 2-35/64, 4-5/32, 5-3/4 |
Table Insert Opening Diameter (In.) | 2-35/64, 4-5/32, 5-3/4 |
Table Size (In.) | 40 x 30 |
Table Travel (In.) | N.A. |
Table Height from Floor (In.) | 35-1/2 |
Sliding Table Size (In.) | N.A. |
Fence Size (L x H) (In.) | 18-3/4 x 4-7/8 |
Fence Travel (Major and Minor) (In.) | N.A. |
Dust Port Outside Diameter (In.) | 4 |
Dust Collection Minimum CFM Required (CFM) | 600 |
Digital Readouts | Spindle Height |
Electrical Controls | Yes |
Motor Power (HP) | 5 |
Motor Phase | 1 |
Motor Voltage (V.) | 230 |