|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cutting Speeds | Must Specify when Ordering |
LT(Low Turn) designed for solid mild steel, solid stainless steel & thick wall pipe | LT (Low Turn) 22 rpm / 44 rpm | Motor rate: 3 hp |
HT(High Turn) designed for thin wall tube .060 wall thickness or thinner and non-ferrous material | HT (High Turn) 44 rpm / 88 rpm | Motor rate: 2.5 hp |
VS (Variable Speed) ~ wired 230/460, 3-ph | VS (Variable Speed) 11 / 177 rpm | Motor Rate: 5 hp |
VS (Variable Speed) ~ wired 220, 1-ph | VS (Variable Speed) ~ 11 / 177 rpm | Motor Rate: 5 hp |
SS (Single Speed) designed for 220v 1 ph applications | SS (Single Speed) 44 rpm | Motor Rate: 3 hp |
TUBING 90 Degrees | Round 4-1/2" (114 mm) | Square 4-1/4" x 4-1/4" (108 x 108 mm) | Rectangle 5-1/2" x 4" (140 x 102 mm) |
TUBING 45 Degrees | Round 4" (102 mm)| Square 4" x 4" (102 x 102 mm) |Regtangle 4" x 4" (102 x 102 mm) |
SOLID 90 Degrees | Round 2" (51 mm) | Square 2" x 2" (51 x 51 mm) |
SOLID 45 Degrees | Round 1-3/4" (44 mm) | Square 1-3/4" x 1-3/4" (44 x 44 mm) |
Factory Wired | Specify: 208 3 ph | 230 3 ph | 460 3 ph | 575 volt, 3 ph 60 hz | 220 1-ph 60 Hz (SS Model only) |
Maximum Diameter Blade | 14" |
Arbor Bore | 1-9/16" |
Pin Spacing | 4/12/64 |
Width | 21-7/8" |
Depth | 43-1/2" |
Height no including handle | 56-1/4" |
Height from floor to vise | 37-7/16" |
Shipping Weight | 660 lbs. |
Documentation
Videos
Reviews