Continuous-duty 1-1/2HP motor, 110-120 Volt power.
25” width capacity allows wide sanding in a single pass.
Sand stock as short as 2-1/4”, as thin as 1/32” as thick as 4”.
Exclusive take-up fastener makes changing abrasive quick and easy and keeps the abrasive tight on the sanding drum.
Height adjustment handle makes both radical height changes and minute adjustments for extremely precise sanding thickness control. 3/32” per turn height adjustment.
Precisely dimension stock within .010” across width of sander.
Roller height and downward pres- sure are adjustable, eliminating snipe.
Precision-flattened steel conveyor bed reinforced with four steel cross sections for no “flex” in conveyor.
Infinitely variable feed rate, from 0 - 10 feet per minute.
Cast stand, zinc-plated steel bed, cen- terless ground column tubes. Depth gauge with locking stop included.
Minimum of 600 CFM dust collection recommended.
Shipped assembled, some minimal assembly required.
Drum ball bearings are sealed and permanently lubricated.
110 Volt Model
725002 ShopPro 25, 20 amp service required.
59120 Abrasive Cleaning Stick.
98-0130 Casters (Set of 4).
98-2201 Infeed / Outfeed Tables.
61-1002 Poly Conveyor Belt
98-0118 ProScale™ DRO (Digital Depth Gauge).
98-0070 Rack-N-Roll (Abrasive Storage Shelf)
"Pre-Cut" Abrasives 36-200 Grit.
"Pre-Marked" Abrasives 24-200 Grit