Is the largest open-end drum sander on the market, allowing you to sand
up to 50" wide in a double pass!
Exceptional SuperMax Features
We’ve addressed issues common with other drum sanders by engineering
these exclusive features. No other drum sander on the market has
these features!
Simple alignment feature Just one nut will adjust the
conveyor to parallel the sanding head, making aligning the
conveyor to the sanding head fast and easy.
Indexed alignment setting Has an indexed alignment
setting for narrow and wide stock. When sanding stock
wider than 25”, the index lever will properly adjust the
conveyor for flawless wide sanding.
Easy height adjustments A thrust bearing below the
handle and a nut positioned above prevents the drum from
moving out of the set position while sanding. No backlash or
slop in the height adjustment mechanism allowing easier and
smoother height adjustments.
Drum will never go “out of alignment” The drum
carriage is bolted to the base, preventing any movement or alignment issues.
Sanding Capacity:
Maximum Width (in): 50 (two passes)
Minimum Length (in): 2-1/4
Maximum Thickness (in): 4
Minimum Thickness (in): 1/32
Dimensions (in): 27D x 46W x 53H
Drum (in): 5 x 25 extruded aluminum
Drum Speed: 1740 RPM
Dust Hood:
1- 4" vacuum port, min. 800 CFM
recommended
Conveyor Motor:
43 in.-lb. torque, direct drive D.C. motor,
infinitely variable 0-10 FPM
Drive Motor (TEFC): 1-3/4 HP
Power Requirements: 110 V 20 amp
Shipping Weight (lbs): 369 (3 boxes incl. stand)
up to 50" wide in a double pass!
Exceptional SuperMax Features
We’ve addressed issues common with other drum sanders by engineering
these exclusive features. No other drum sander on the market has
these features!
Simple alignment feature Just one nut will adjust the
conveyor to parallel the sanding head, making aligning the
conveyor to the sanding head fast and easy.
Indexed alignment setting Has an indexed alignment
setting for narrow and wide stock. When sanding stock
wider than 25”, the index lever will properly adjust the
conveyor for flawless wide sanding.
Easy height adjustments A thrust bearing below the
handle and a nut positioned above prevents the drum from
moving out of the set position while sanding. No backlash or
slop in the height adjustment mechanism allowing easier and
smoother height adjustments.
Drum will never go “out of alignment” The drum
carriage is bolted to the base, preventing any movement or alignment issues.
Sanding Capacity:
Maximum Width (in): 50 (two passes)
Minimum Length (in): 2-1/4
Maximum Thickness (in): 4
Minimum Thickness (in): 1/32
Dimensions (in): 27D x 46W x 53H
Drum (in): 5 x 25 extruded aluminum
Drum Speed: 1740 RPM
Dust Hood:
1- 4" vacuum port, min. 800 CFM
recommended
Conveyor Motor:
43 in.-lb. torque, direct drive D.C. motor,
infinitely variable 0-10 FPM
Drive Motor (TEFC): 1-3/4 HP
Power Requirements: 110 V 20 amp
Shipping Weight (lbs): 369 (3 boxes incl. stand)