Sealer-sand or whitewood sand doors in one pass up to 30 ft/
min.
Distress lumber with a wire & nylon brush combination up to
30 ft/min.
Sand mouldings with two grits in one pass.
Sample testing available & encouraged
Straight-line or deburr metal with a single pass
Digital Bristle contact gauge (DRO depth gauge) included
RPM Gauge displays brush speed, variable, 400 – 1200 RPM
Wire, Nylon, Abrasive are just some of the brushes available
Electric height adjustment, high speed and adjustable speed
Minimum of 1800 CFM dust collection recommended
Two, 5 HP, TEFC Leeson motors, 208-230 Volt power, single or 3
Phase, Cont. duty
(2)-20 Amp Electrical services required on 3 phase, (2)-30 Amp
services required on single phase models
Brush rotation is reversible ( 1st brush).
Sanding Capacity
Maximum Width (in):24
Minimum Length (in):12
Maximum Thickness (in): 11 (varies with brush style)
Minimum Thickness (in): 1/32
Brush Speed: Infinitely variable 400 to 1200 RPM
Height Adjustment (in):Power and manual controls, 3/32" per turn; ProScale digital readout and locking stop included
Conveyor Motor : 220 in.-lb. torque, direct drive D.C. motor infinitely variable 0-30 feet per minute
Drive Motor (TEFC):2) - 5 HP, 1740 RPM; 208-230V, 60HZ;
continuous-duty.
Power Requirements:
1 Ph, 30 amp service (2)
3 Ph, 20 amp service (2)
min.
Distress lumber with a wire & nylon brush combination up to
30 ft/min.
Sand mouldings with two grits in one pass.
Sample testing available & encouraged
Straight-line or deburr metal with a single pass
Digital Bristle contact gauge (DRO depth gauge) included
RPM Gauge displays brush speed, variable, 400 – 1200 RPM
Wire, Nylon, Abrasive are just some of the brushes available
Electric height adjustment, high speed and adjustable speed
Minimum of 1800 CFM dust collection recommended
Two, 5 HP, TEFC Leeson motors, 208-230 Volt power, single or 3
Phase, Cont. duty
(2)-20 Amp Electrical services required on 3 phase, (2)-30 Amp
services required on single phase models
Brush rotation is reversible ( 1st brush).
Sanding Capacity
Maximum Width (in):24
Minimum Length (in):12
Maximum Thickness (in): 11 (varies with brush style)
Minimum Thickness (in): 1/32
Brush Speed: Infinitely variable 400 to 1200 RPM
Height Adjustment (in):Power and manual controls, 3/32" per turn; ProScale digital readout and locking stop included
Conveyor Motor : 220 in.-lb. torque, direct drive D.C. motor infinitely variable 0-30 feet per minute
Drive Motor (TEFC):2) - 5 HP, 1740 RPM; 208-230V, 60HZ;
continuous-duty.
Power Requirements:
1 Ph, 30 amp service (2)
3 Ph, 20 amp service (2)