US Concepts Model CHB-12 Hauncher-Notcher.
The heavy duty Hauncher is used to make cuts (notches) along the edge of the board. The horizontal spindle moves hydraulically past the tables with the clamped board. A back up board in the table and climb cut assure the clean cut, even on cross grain. Material air clamps and spindles motion are actuated by a foot switch. Adjustable back fence sets the depth of cut.
SPECIFICATIONS:
· Motor: 15HP
· Speed of cutter head: 4300 or 6200 rpm
· Cutting width: 12" / 16" / 20"
· Spindle Diameter: 40 mm
· Max. cutter diameter: 10"
· Net weight: 1540 lbs
· Max. material height: 8"
. Max. cutting depth: 2-1/2"
· Spindle feed speed Air/Oil: 0 - 25 FPM
· Dust outlet: 6-1/2"
· Table size: 36" x 16"
No. of Clamps: 2
STANDARD EQUIPMENT:
- Automatic starter and motor overload protection
- Variable speed for feed
- Hydro-Check spindle feed system
- Cutting depth adjustment
- Heavy duty frame
- Cutter guard
- Guarded Foot Switch for cycle activation
- Angular side stop
- 208-230V, 3 phase electric
- Electrical equipment according to UL/CSA
The heavy duty Hauncher is used to make cuts (notches) along the edge of the board. The horizontal spindle moves hydraulically past the tables with the clamped board. A back up board in the table and climb cut assure the clean cut, even on cross grain. Material air clamps and spindles motion are actuated by a foot switch. Adjustable back fence sets the depth of cut.
SPECIFICATIONS:
· Motor: 15HP
· Speed of cutter head: 4300 or 6200 rpm
· Cutting width: 12" / 16" / 20"
· Spindle Diameter: 40 mm
· Max. cutter diameter: 10"
· Net weight: 1540 lbs
· Max. material height: 8"
. Max. cutting depth: 2-1/2"
· Spindle feed speed Air/Oil: 0 - 25 FPM
· Dust outlet: 6-1/2"
· Table size: 36" x 16"
No. of Clamps: 2
STANDARD EQUIPMENT:
- Automatic starter and motor overload protection
- Variable speed for feed
- Hydro-Check spindle feed system
- Cutting depth adjustment
- Heavy duty frame
- Cutter guard
- Guarded Foot Switch for cycle activation
- Angular side stop
- 208-230V, 3 phase electric
- Electrical equipment according to UL/CSA
Spindle Diameter | 40 mm or 1-1/2" |
Spindle Length | 12" (305 mm), 16" (410MM), 20" (510MM) |
Max Cutter Diameter | 10" (254 mm) |
Max Material Height | 8" (200 mm) |
Max Cutting Depth | 2 1/2" (64 mm) |
Spindle Speed | 6200 RPM |
Feed Speed (Air/Oil) | 0 - 21 FPM |
Dust Outlet | 2 x 6" (150 mm) |
Motor | 15 HP (11 KW) |
Air Clamps | 2 |
Table Size | 28" (36") x 16" |
Machine Weight | 1650 lb (750 kg) |
Electric | 230/460V 3 phase |