PMK Model C-1205 PLC Coping System.
-Chip free coping or end-matching of squares or profiled parts without the need of a back-up piece.
-Two counter rotating spindles, 1 ¼” Diameter – 7000 RPM
-7.5HP Motor, 230/460 volts (please specify your voltage). @230 volts/30amps, @ 460 volts/20amps
-Maximum cutter diameter 5” OD, Minimum Cutter diameter 3.5” OD.
-Maximum size of part 2 ½” thick & 13 ½” wide. Minimum length of part 3” Maximus depth of cut ¾”
-Minimum width of part is determined by the O.D. of the cutter and if the part is profiled or not.
-Unlimited length of part.
-The C-1205 has External flow valve that allow you to adjust the speed of the sliding table according to the thickness, width & density of the wood you are profiling.
-NEW Safety lenses in top of hood to check rotation of spindle
-New up-graded PLC Controller
-Cycle time adjustable from 5 to 10 seconds
-The C-1205 has the capacity to stack tooling. Maximum two cutters per spindle.
-Dust Hood with 5” port. CFM’s required 1000
-THK style rails for guidance of carriage stroke and hold down clamp.
-Side pressure clamp insures proper alignment with fence.
-THE C-1205 IS RELIABLE, HEAVY DUTY, TESTED & PROVEN.
-The C-1205 has a small foot print 52”wide, 39” deep, and 42” high.
-The C-1205 meets UL & CSA Electrical Standards.
-Machine weight 1,439 lbs. (+/-).
Now Standard equipment;
-Includes Aluminum Sub-Table for stacking of tooling.
-Includes Second side pressure clamp, when using the sub-table.
-Chip free coping or end-matching of squares or profiled parts without the need of a back-up piece.
-Two counter rotating spindles, 1 ¼” Diameter – 7000 RPM
-7.5HP Motor, 230/460 volts (please specify your voltage). @230 volts/30amps, @ 460 volts/20amps
-Maximum cutter diameter 5” OD, Minimum Cutter diameter 3.5” OD.
-Maximum size of part 2 ½” thick & 13 ½” wide. Minimum length of part 3” Maximus depth of cut ¾”
-Minimum width of part is determined by the O.D. of the cutter and if the part is profiled or not.
-Unlimited length of part.
-The C-1205 has External flow valve that allow you to adjust the speed of the sliding table according to the thickness, width & density of the wood you are profiling.
-NEW Safety lenses in top of hood to check rotation of spindle
-New up-graded PLC Controller
-Cycle time adjustable from 5 to 10 seconds
-The C-1205 has the capacity to stack tooling. Maximum two cutters per spindle.
-Dust Hood with 5” port. CFM’s required 1000
-THK style rails for guidance of carriage stroke and hold down clamp.
-Side pressure clamp insures proper alignment with fence.
-THE C-1205 IS RELIABLE, HEAVY DUTY, TESTED & PROVEN.
-The C-1205 has a small foot print 52”wide, 39” deep, and 42” high.
-The C-1205 meets UL & CSA Electrical Standards.
-Machine weight 1,439 lbs. (+/-).
Now Standard equipment;
-Includes Aluminum Sub-Table for stacking of tooling.
-Includes Second side pressure clamp, when using the sub-table.