CANTEK GT635ARD-16 25” Double Surface Planer with 16” Thickness Opening.
FEATURES
Heavy duty cast-iron machine body and table for vibration-free running
Cutterheads are spiral insert type with six (6) rows of carbide inserts. These cutterheads produce an excellent finish, run much quieter than conventional straight knife heads, and require less HP to perform the planing operation. The inserts are an industry standard item, and have two (2) cutting edges.
Conveyor feed system uses a spring loaded pin arrangement to pass material over the bottom jointing head. A driven rubber top roll, after the top head, delivers the material out of the machine
Variable feed speed by frequency inverter
Infeed bed roller – idle
3 Bottom Full Width Bed Rolls (2 driven and 1 idle) also included – really improves feeding of difficult materials
Digital electronic thickness adjustment in INCH and MM. Inch is to 3-deicimal places
Opening of the machine is motorized, and driven by a 1/2HP TEFC motor
Convenient stationary side mounted control panel
Easy to access external handwheel adjustment of infeed bed
The Table surface is hard chrome plated and precision ground for smooth performance and maximum wear resistance at high speeds
A hand lubricator is provided for convenient lubrication to the table slideways and an auto lubricator provides lubrication to the caterpillar feed chain
Chipbreaker and top feed roller into top head is sectional
Rubber outfeed top roller to prevent chip marking
Over thickness safety shut-off bar across infeed.
Ammeter for each motor on control panel to monitor motor load
Side covers to protect operator around bottom head
Star Delta soft start
Isolator switch to shut off power to control panel for added safety.
Electrics are available in 230/460 or 575/3/60 to UL/CSA Standards
SPECIFICATIONS
Maximum working Width 25”
Maximum working Thickness 16” (8”, 20”, 24” Thickness – optional)
Minimum workpiece length 12.2”
Bottom jointing head motor 20 HP TEFC
Top planing head motor 25 HP TEFC
Feed motor 5 HP
Table elevation motor ½ HP
Cutterhead diameter 4”
Knife information 30mmx12mmx1.5mm (180 pcs. total)
Cutterhead speed 5400 RPM
Feed speed (variable) 23-65 FPM (Higher Feed Speeds – optional)
Dust collection 2 @ 6” diameter
Table size 27” x 103” x 32” high
Net weight 7250 lbs
FEATURES
Heavy duty cast-iron machine body and table for vibration-free running
Cutterheads are spiral insert type with six (6) rows of carbide inserts. These cutterheads produce an excellent finish, run much quieter than conventional straight knife heads, and require less HP to perform the planing operation. The inserts are an industry standard item, and have two (2) cutting edges.
Conveyor feed system uses a spring loaded pin arrangement to pass material over the bottom jointing head. A driven rubber top roll, after the top head, delivers the material out of the machine
Variable feed speed by frequency inverter
Infeed bed roller – idle
3 Bottom Full Width Bed Rolls (2 driven and 1 idle) also included – really improves feeding of difficult materials
Digital electronic thickness adjustment in INCH and MM. Inch is to 3-deicimal places
Opening of the machine is motorized, and driven by a 1/2HP TEFC motor
Convenient stationary side mounted control panel
Easy to access external handwheel adjustment of infeed bed
The Table surface is hard chrome plated and precision ground for smooth performance and maximum wear resistance at high speeds
A hand lubricator is provided for convenient lubrication to the table slideways and an auto lubricator provides lubrication to the caterpillar feed chain
Chipbreaker and top feed roller into top head is sectional
Rubber outfeed top roller to prevent chip marking
Over thickness safety shut-off bar across infeed.
Ammeter for each motor on control panel to monitor motor load
Side covers to protect operator around bottom head
Star Delta soft start
Isolator switch to shut off power to control panel for added safety.
Electrics are available in 230/460 or 575/3/60 to UL/CSA Standards
SPECIFICATIONS
Maximum working Width 25”
Maximum working Thickness 16” (8”, 20”, 24” Thickness – optional)
Minimum workpiece length 12.2”
Bottom jointing head motor 20 HP TEFC
Top planing head motor 25 HP TEFC
Feed motor 5 HP
Table elevation motor ½ HP
Cutterhead diameter 4”
Knife information 30mmx12mmx1.5mm (180 pcs. total)
Cutterhead speed 5400 RPM
Feed speed (variable) 23-65 FPM (Higher Feed Speeds – optional)
Dust collection 2 @ 6” diameter
Table size 27” x 103” x 32” high
Net weight 7250 lbs