Allows for 4 cutting modes: single two, three and 4-side planing and moulding.Individual powerful motor drive for each spindle.High quality disco type variable feed speed unit.Automatic machine stop when top guard is opened.In feed & outfeed table extensions (optional) for firm support of large word.Equipped with 3 depth of cut control plates for bottom cutterhead.Sea-thru top guard for viewing cutterheads.Comes with straight knives for top / bottom heads. Does not include side heads.
CENTRALIZED CONTROL PANEL
All motion controls of the machine are centralized on the control panel, located at the left side of the machine for easy access and operation convenience.
Each cutterhead is individually controlled on the control panel
TOP HORIZONTAL SPINDLE
Equipped with two planer knives and two pattern knives for planing and moulding operations at a time.
LEFT VERTICAL SPINDLE ADJUSTMENT
The left vertical spindle can be adjusted in forward and backward direction to suit workpiece width. A mechanical meter is equipped for accurate reading of the spindle adjustment amount.
The entire table can be raised or lowered by turning a handwheel, equipped with a mechanical meter for accurate reading of the table adjustment.
VARIABLE FEED SPEED
Variable feed speed is achieved through a disco type variable speed unit speed combined with gear reducer, making this moulder ideal for cutting soft and hard wood material.
Variable feed speed range is 11-52 feet per minute
Planing Width: 13” (330MM) Depth: 7/16” – 9” (12 – 230mm)
2-Side Planing/Moulding Width: 13-5/8"” (346mm) Depth: 7/16” – 9” (12 – 230mm)
4-Side Planing/Moulding Width: 0 – 12” (0 – 305mm) Depth: 7/16” – 4” (12 – 100mm)
Top Horizontal Spindle Width: 17-15/16” (455mm) Max. planing depth: 5/16” (8mm) Max. moulding depth: 3/4” (19mm) Speed: 7000 RPM Cutterhead diameter: 2-7/8” (72mm) Motor: 7-1/2HP (5.5Kw)
Bottom Horizontal Spindle: Width: 13-5/8” (346mm) Max. planing depth: 1/4” (6mm) Max. moulding depth: 3/16" (5mm) Speed: 7000 RPM Cutterhead diameter: 2-7/8” (72mm) Motor: 5HP (3.7Kw)
Right & Left Vertical Spindles Max. cutting height: 4” (100mm) Max. cutting depth: 13/16” (21mm) Spindle diameter: 1-1/4" (31.75mm) Speed: 7000 RPM Max. cutterhead diameter: 3-1/2” (90mm) Motor: 4.1HP (3Kw)
Table Area: 1125 x 685 mm Elevation: 230mm Power Table (Raise): 120w
Dust Hood Outlet 101.6mm (4")
Feed System Speed (Variable): 11-52 ft/min. Motor: 1/2HP (0.375Kw)
Machine Dimensions (LxWxH) 1485 x 1265 x 1216 mm
Packing Dimensions (LxWxH) 1350 x 1140 x 1130 mm
New Weight 635kgs (1400bs)
Gross Weight 730kgs (1610lbs)