DMC sd 60 KRCS 110 - Automatic wide belt planer/sander
with 1st “K” group (spiral planer), 2nd “R” group (175mm 65Sh roller) and 3rd “CS” combined group (160mm 45Sh roller/pad)
480 voltage
Frequency 60 hz
"B" version for KRCS
complete with:
on/off pneumatic selector for planer, 1st “K” group
on/off pneumatic selector for roller, 2nd “R” group
on/off pneumatic selector for roller, 3rd “CS” group
“MESAR” elastic sectional pad
on/off pneumatic selector for pad
“Logic 50 K” electronic control
electronic positioning for working table
Base and working table
steel structure with electric cabinet on the machine front
sanding belts introduction from the machine left side
powered adjustment of working thickness
main motor positioned inside the base
Electrical equipment
electromechanical keyboard positioned on the machine front side
automatic star-delta start of the main motor
overload protections on the motors
motors in isolation class IP54
Emergency and safety devices
automatic brake for rapid shutdown of the operating group
hand-safety emergency device in the infeed panel area
front and rear emergency pushbutton
padlockable main switch
automatic emergency stop machine for:
sanding belt breaking
not-tensioned sanding belt
lateral outplacement of sanding belt
absence of compressed air
overload on main motor
with 1st “K” group (spiral planer), 2nd “R” group (175mm 65Sh roller) and 3rd “CS” combined group (160mm 45Sh roller/pad)
480 voltage
Frequency 60 hz
"B" version for KRCS
complete with:
on/off pneumatic selector for planer, 1st “K” group
on/off pneumatic selector for roller, 2nd “R” group
on/off pneumatic selector for roller, 3rd “CS” group
“MESAR” elastic sectional pad
on/off pneumatic selector for pad
“Logic 50 K” electronic control
electronic positioning for working table
Base and working table
steel structure with electric cabinet on the machine front
sanding belts introduction from the machine left side
powered adjustment of working thickness
main motor positioned inside the base
Electrical equipment
electromechanical keyboard positioned on the machine front side
automatic star-delta start of the main motor
overload protections on the motors
motors in isolation class IP54
Emergency and safety devices
automatic brake for rapid shutdown of the operating group
hand-safety emergency device in the infeed panel area
front and rear emergency pushbutton
padlockable main switch
automatic emergency stop machine for:
sanding belt breaking
not-tensioned sanding belt
lateral outplacement of sanding belt
absence of compressed air
overload on main motor
working width | 1,100 mm |
min/max working thickness | 4-170 mm |
sanding belt width | 1115 mm |
sanding belt length | 2150 mm |
1st unit motor power | 24 HP |
2nd unit motor power | 24 HP |
3rd unit motor power | 18 HP |
feed belt motor power | 4 HP |
feed speed | 3.5/18 m/min |