Capable of sanding linear profiled material on 3 sides
The Main Frame is fabricated of heavy steel plate and ribbed to minimize vibration and deflection.
Centralized Control Panel for operator convenience. Clearly Identified & colour coded push buttons simplifying setup & operation
Variable Speed Adjustment by Inverter VFD’s to all Brush Sanding Heads (200-1200 RPM)
(2) Sets of Top Brushing Sanding Heads – with working height adjusted by handwheel and
can be set on an angle
(1) Left Side Brush Sanding Head is adjustable up/down, in/out and can be set on an angle
(1) Right Side Brush Sanding Head which can be adjusted up/down and in and out and can be
set on an angle
(1) Additional Left Side Sanding Head is adjustable up/down, in/out, and can be set on an angle
Top Press Rolls Working Height adjusted by hand wheel.
Brushing head consists of cleaning brush units and abrasive cloth units. The dovetail pocket design allows for easy abrasive/brush replacement.
Comes with (1) set of abrasives and brushes for each head
The Abrasive Sanding Strips are available 100,120,180,240,320 or 400grit as desired (an example idea is 240 grit before painting & 320 grit for sealer sanding)
Max. working Width 11" 280mm
Max. working height 4" 100mm
Min. work-pieces length 33" 840mm
Min. work-pieces thickness 3/8" 9.5mm
Feed speed (Variable) 6.5 ~ 30 FPM 2~9 M/min
Speed of Sanding Heads 200 ~ 1200 RPM
Top Brush Head Motors 2 x 3/4 HP 2 x .55KW (2 x 3.6”-90mm dust ports)
Left Brush Head Motor 1 x ½ HP 1 x 0.37KW (3.6”-90mm dust port)
Right Brush Head Motor 1 x ½ HP 1 x 0.37KW (3.6”-90mm dust port)
Left (Angling) Brush Head Motor 1 x ½ HP 1 x 0.37KW (2.5”-63mm dust port)
Conveyor motor ¼ HP 0.18KW
Machine dimension (LxWxH) 73” x 49” x 61” 1840 x 1230 x 1550mm
Packing dimension (LxWxH) 81” x 40” x 64” 2050 x 1010 x 1630mm
Net weight 750 LBS 340 KGS
Gross weight 1035 LBS 470 KGS
Electrics 230/3/60 = 14 Full Load amp
Stock Machine with 230/3/60 electrics to CSA/UL electrical standards.