SUPERMAX 37 x 2 DUAL DRUM 220V 5HP 3PH TW.
Includes casters.
Sand two grits in a single pass with a 37×2 Double Drum Sander. Featuring INTELLISAND Technology and a 5 HP motor, you can significantly reduce the amount of time you spend sanding.
The 37×2 Double Drum Sander features INTELLISAND Technology that auto-regulates the conveyor based on load, preventing burning, gouging, and damaging stock. The machine comes standard on an open-column base, and features a 5 HP motor. Available in Single and 3 Phase power.
1740 RPM Drum speed 5 x 37
100 in. -lb. torque, direct drive D.C motor, ranged variable, 0-15 FPM
208-230V, 60HZ; 1 Ph, 30 amp service
Minimum Thickness (in): 1/32
Maximum Thickness (in): 12
INTELLISAND Technology: Automatically adjusts conveyor speed based on load
Prevents gouging, damaging or burning stock
Provides consistent finish even with varying grain pattern and density
Greatly increases abrasive planing and dimensioning speed
Flatness Guarantee: Precision-flattened steel conveyor bed reinforced with four steel cross sections for no “flex” in conveyor, guaranteeing flatness to less than .010″ across the width of the sander
Abrasive conveyor belt offers the best grip for raw wood, giving you the ability to accommodate stock that is much shorter or thinner
Patented Abrasive Attachment System effectively tensions the abrasive wraps, preventing loose abrasive and overlap
Easiest access to abrasive fastening system of any drum sander! Machine design includes additional space around abrasive, eliminating the need for special tools.
Self-cooling drum prevents overheating and extends abrasive life
Includes casters.
Sand two grits in a single pass with a 37×2 Double Drum Sander. Featuring INTELLISAND Technology and a 5 HP motor, you can significantly reduce the amount of time you spend sanding.
The 37×2 Double Drum Sander features INTELLISAND Technology that auto-regulates the conveyor based on load, preventing burning, gouging, and damaging stock. The machine comes standard on an open-column base, and features a 5 HP motor. Available in Single and 3 Phase power.
1740 RPM Drum speed 5 x 37
100 in. -lb. torque, direct drive D.C motor, ranged variable, 0-15 FPM
208-230V, 60HZ; 1 Ph, 30 amp service
Minimum Thickness (in): 1/32
Maximum Thickness (in): 12
INTELLISAND Technology: Automatically adjusts conveyor speed based on load
Prevents gouging, damaging or burning stock
Provides consistent finish even with varying grain pattern and density
Greatly increases abrasive planing and dimensioning speed
Flatness Guarantee: Precision-flattened steel conveyor bed reinforced with four steel cross sections for no “flex” in conveyor, guaranteeing flatness to less than .010″ across the width of the sander
Abrasive conveyor belt offers the best grip for raw wood, giving you the ability to accommodate stock that is much shorter or thinner
Patented Abrasive Attachment System effectively tensions the abrasive wraps, preventing loose abrasive and overlap
Easiest access to abrasive fastening system of any drum sander! Machine design includes additional space around abrasive, eliminating the need for special tools.
Self-cooling drum prevents overheating and extends abrasive life