Newport Manufactruring RM100 Mini moulder .
For the production profiling of door stile and rail material. Machine is a hopper fed, HSK63 interchangeable spindle with integrated power feeder and touch screen control. Operator enters the tool diameter and the desired finished work-piece thickness and the machine will set the fence position automatically.
• HSK interchangeable spindle, standard. (Other spindle types available)
• 8 Hp at 7,500 RPM
• 230 volt, 3phase, 60 hz standard
• Variable spindle RPM
• Reversible rotation for climb cutting (requires safety cage)
• Bore diameter determined by tool holders.
• Hopper feeding, typically face down
• Digitally positioned sizing fence,
• Up to 20 preset “recipes” for pre-programmed set-ups
• Part length maximum: none
• Part length minimum: 3-1/2” (depending on part width)
• Part width maximum: 8-1/2”
• Part width minimum: 1-1/2”
• Dust collection: 2 outlets at 4” (climb or conventional cutting)
• Compressed air required: 80 PSI
For the production profiling of door stile and rail material. Machine is a hopper fed, HSK63 interchangeable spindle with integrated power feeder and touch screen control. Operator enters the tool diameter and the desired finished work-piece thickness and the machine will set the fence position automatically.
• HSK interchangeable spindle, standard. (Other spindle types available)
• 8 Hp at 7,500 RPM
• 230 volt, 3phase, 60 hz standard
• Variable spindle RPM
• Reversible rotation for climb cutting (requires safety cage)
• Bore diameter determined by tool holders.
• Hopper feeding, typically face down
• Digitally positioned sizing fence,
• Up to 20 preset “recipes” for pre-programmed set-ups
• Part length maximum: none
• Part length minimum: 3-1/2” (depending on part width)
• Part width maximum: 8-1/2”
• Part width minimum: 1-1/2”
• Dust collection: 2 outlets at 4” (climb or conventional cutting)
• Compressed air required: 80 PSI