NOVA SI 300S
5.5ft Sliding Table Saw
The Nova SI 300S is a short stroke sliding table saw and is commonly used for cutting smaller components. The sliding table can be locked into position and the saw may also be used for ripping large panels. Both large and small shops can benefit from this versatile performer.
Blade Group Trunion for Pivoting
The double trunion assembly for the blade tilting is part of the blade group casting. This eliminates the possibility of misalignment which exists when these parts are bolted in the place as some manufacturers do. Others use a small pivot pin to hold up the saw group.
E-Z Dial Scoring Set
Adjusting the scoring set is quick and easy. Simply turn the dial to adjust the width of the score. This system eliminates the need for shims and the constant adjustment they require. It is fully adjustable in 0.1mm increments.
Cast-Iron Blade Group
The Nova SI 300S has a massive cast-iron blade group which tilts on a trunnion mechanism. This closed system allows for maximum dust removal, and is the most durable tilting design. The entire blade group raises and lowers on two steel columns, and the gear assemblies are encased in a patented mechanism which doesn’t allow dust or pitch to penetrate the joining mechanism.
**Specifications are subject to change**
5.5ft Sliding Table Saw
The Nova SI 300S is a short stroke sliding table saw and is commonly used for cutting smaller components. The sliding table can be locked into position and the saw may also be used for ripping large panels. Both large and small shops can benefit from this versatile performer.
Blade Group Trunion for Pivoting
The double trunion assembly for the blade tilting is part of the blade group casting. This eliminates the possibility of misalignment which exists when these parts are bolted in the place as some manufacturers do. Others use a small pivot pin to hold up the saw group.
Blade Group Pivoting Gear
Direct shaft drive coupled with rack and pinion gearing allow smooth, angle adjustment of the saw blade.E-Z Dial Scoring Set
Adjusting the scoring set is quick and easy. Simply turn the dial to adjust the width of the score. This system eliminates the need for shims and the constant adjustment they require. It is fully adjustable in 0.1mm increments.
Cast-Iron Blade Group
The Nova SI 300S has a massive cast-iron blade group which tilts on a trunnion mechanism. This closed system allows for maximum dust removal, and is the most durable tilting design. The entire blade group raises and lowers on two steel columns, and the gear assemblies are encased in a patented mechanism which doesn’t allow dust or pitch to penetrate the joining mechanism.
STANDARD EQUIPMENT
- ¾” DADO Capability (not available with some options)
- Compact squaring frame support with fence
- Anodized aluminum alloy carriage sliding on “v style” hardened steel guides
- Overarm Blade Guard
- Mechanical readout of tilt (0° – 45°) on the machine front side
- Blade protection on riving knife with exhaust outlet
- Manual lifting and tilt of saw unit by means of handwheels on the machine front side
- Squaring frame complete with mobile aluminium bar for quick setup for angular cuts
- Heavy duty crosscut fence with flip stops
- Control panel on the machine front side tilted 25° for easy access
- Scoring unit with external setup and stops for a quick re-positioning of the blade
- “EZ Dial” Adjustment for the split scoring blade
- Automatic brake on main sawblade
- Scoring unit powered by independent motor
- Rip fence with micrometric adjustment
- Eccentric clamp
- Table extension on exit side
- Overload switch protection
- Auxiliary low voltage circuit (110 voltage)
- Direct start main motor
- We provide a complimentary 12.4” (315mm) blade with the machine
TECHNICAL SPECIFICATIONS
Motor horsepower | 11 HP |
Scoring Motor Horsepower | 1 HP |
Fixed table size | 31” x 36.4” |
Sliding table size | 12” x 61” |
Height of worktable | 33.5” |
Rip capacity | 1270mm (50”) |
Max. length of crosscut with scoring | 1600mm (62.9”) |
Main blade diameter/arbor | 315mm / 1” |
Scoring blade diameter/arbor | 120mm / 3/4" |
Arbor speed – main/scoring | 4,800 / 9,600 rpm |
Dust outlets – main/overarm guard | 120mm / 65mm (4”/2.5”) |
Depth of cut – 0 degrees/45 degrees | 100mm / 70mm (3.9”/2.75”) |
Overall dimensions (full stroke w/over guard) | 148” x 135” x 61” |
Crated dimensions | 5.5’ x 3.8’ x 3.8’ |
Shipping weight | 813kg (1,800 lbs) |
Net weight | 760kg (1,675 lbs) |
Electrical requirements | 230 volt, 3phase |
Dust extraction | 850 cfm |
Nova SI 300S - Manual Circular Saw with 1600mm (5') Carriage | |
R1.09.36 | Nova si 300s Usa/Canada version |
93.07.35 | 230 Volt |
93.15.01 | Frequency 60Hz |
57.02.61 | Ripping Capacity on parallel fence of 1270mm (50") |
57.01.28 | 11 HP Motor at 60Hz |
53.03.40 | Expandable scoring blade |
57.03.36 | “DADO” machining |
57.01.07 | Eccentric Clamp |
57.01.24 | Overhead saw guard with incorporated dust extraction |
57.04.15 | Lama sega 315mm |
08.06.42 | Seaworthy packing |
**Specifications are subject to change**