LEADERMAC Model SYC300M
Heavy Duty Roll Feed Ripsaw
Features:
Cast iron base w/easily accessed Anchor Bolts
Lift Up Sound Enclosure for quieter and safer rip saw operation with light
Hydro-loc Outboard Bearing System for best gang sawing shaft support with grease gun
Cardan Shaft Drive throughout
All driven rolls – hence a very solid true drive
6 Driven Close Coupled Top feed rollers
Top Rolls are Air Tensioned
4 Driven Bed rollers
Variable Pressure Controls – on top feed rolls
Motorized Lift to Top Rolls
Saw spindle has motorized lift and lowering
Belt Driven Saw Spindle
Saw blades cut from below hence better Dust Removal and a heavier sturdier design
Saws are pre-mounted on a slip on sleeve for quick change.
Anti-Kickback Devices included- 1 Top Set and 2 bottom sets
Central Lube System
Star-Delta Main Saw motor Starter – low amperage start
Variable frequency drive to main arbor, this includes a safety braking function allowing the quick – fully electronic stopping of the spindle arbor.
Specifications:
Maximum Thickness 5.1” (130 mm)
Maximum between Outside Saws 11.75” (300 mm)
Minimum length material 10” (250mm) – at slower speeds
Saws 10” min. to 16” Max Dia. x 70mm Bore (Dble Key)
50 mm dia. Spindle with 70 mm keywayed sleeve x 4,000 rpm
Main Motor –stock machine 75 HP
Top Feed Rolls – Rise & Fall 1 HP
Feed Motor 15 HP with VFD Infinitely Variable Speed Control
Vari-speed Feed – stock machine 20 to 200 FPM (6 to 60 m/min)
Weight – net 5,060 lbs.
Mag. Starter and Electrics to UL/CSA Standards
and wired to 460/3/60 (transformer available to run on 230 volt)
Dust Collection outlets 2 x (5”) 125mm & 2 x 5.5” (140mm)(2 top, 2 bottom)
Heavy Duty Roll Feed Ripsaw
Features:
Cast iron base w/easily accessed Anchor Bolts
Lift Up Sound Enclosure for quieter and safer rip saw operation with light
Hydro-loc Outboard Bearing System for best gang sawing shaft support with grease gun
Cardan Shaft Drive throughout
All driven rolls – hence a very solid true drive
6 Driven Close Coupled Top feed rollers
Top Rolls are Air Tensioned
4 Driven Bed rollers
Variable Pressure Controls – on top feed rolls
Motorized Lift to Top Rolls
Saw spindle has motorized lift and lowering
Belt Driven Saw Spindle
Saw blades cut from below hence better Dust Removal and a heavier sturdier design
Saws are pre-mounted on a slip on sleeve for quick change.
Anti-Kickback Devices included- 1 Top Set and 2 bottom sets
Central Lube System
Star-Delta Main Saw motor Starter – low amperage start
Variable frequency drive to main arbor, this includes a safety braking function allowing the quick – fully electronic stopping of the spindle arbor.
Specifications:
Maximum Thickness 5.1” (130 mm)
Maximum between Outside Saws 11.75” (300 mm)
Minimum length material 10” (250mm) – at slower speeds
Saws 10” min. to 16” Max Dia. x 70mm Bore (Dble Key)
50 mm dia. Spindle with 70 mm keywayed sleeve x 4,000 rpm
Main Motor –stock machine 75 HP
Top Feed Rolls – Rise & Fall 1 HP
Feed Motor 15 HP with VFD Infinitely Variable Speed Control
Vari-speed Feed – stock machine 20 to 200 FPM (6 to 60 m/min)
Weight – net 5,060 lbs.
Mag. Starter and Electrics to UL/CSA Standards
and wired to 460/3/60 (transformer available to run on 230 volt)
Dust Collection outlets 2 x (5”) 125mm & 2 x 5.5” (140mm)(2 top, 2 bottom)