Ideal Machine Company (CM2) End Coping Machine.
The Newport CM2 has been specifically designed to produce tear free end coping. The manner of operation is as follows: The work piece is inserted into the machine, against the fence and between the two cutters to the end stop. Cutter #1 rotates in a counterclockwise direction, while cutter # 2 rotates clockwise. Both cutters are solidly mounted to the same sliding carriage that moves in the horizontal plane in relationship to the end of the work piece. The machine is adjusted so that each cutter only moves past the centerline of the part, and never exiting to the other end. By working the part from both sides, chip breakers and counter profile blocks are not needed. The key advantages of the CM-2 are safety, quick cycle time; tear out free operation, quick change to different profiles, increased quality and production.
Technical Specifications:
Motors: 2 at 1.1kW each ( 1 1/2 hp)
Voltage: 220/440 3phase 60 Hz
Air: 6 bar
Spindle RPM: 11,800 RPM
Dust Port: 4”
Weight: 785 lbs
Cutter Diameter: 2”
Profile Height: 2”
Profile Width: 3”
Min Profile Length: 3”
Spindle Taper: ER25 (1 Set of Collets Included)
Tooling is not included.
The Newport CM2 has been specifically designed to produce tear free end coping. The manner of operation is as follows: The work piece is inserted into the machine, against the fence and between the two cutters to the end stop. Cutter #1 rotates in a counterclockwise direction, while cutter # 2 rotates clockwise. Both cutters are solidly mounted to the same sliding carriage that moves in the horizontal plane in relationship to the end of the work piece. The machine is adjusted so that each cutter only moves past the centerline of the part, and never exiting to the other end. By working the part from both sides, chip breakers and counter profile blocks are not needed. The key advantages of the CM-2 are safety, quick cycle time; tear out free operation, quick change to different profiles, increased quality and production.
Technical Specifications:
Motors: 2 at 1.1kW each ( 1 1/2 hp)
Voltage: 220/440 3phase 60 Hz
Air: 6 bar
Spindle RPM: 11,800 RPM
Dust Port: 4”
Weight: 785 lbs
Cutter Diameter: 2”
Profile Height: 2”
Profile Width: 3”
Min Profile Length: 3”
Spindle Taper: ER25 (1 Set of Collets Included)
Tooling is not included.