Used Schmalz VacuMaster Comfort 180.
Consisting of:
Main body (VMC-250-180)
- 250 kg (550 lb) capacity.
- Robust, lightweight structure for turning loads of max. 2500 mm (98.4") width. Large C-frame with
overall height of 63.6" (1640 mm)
- 180° swivelling module: electric linear cylinder with brake (even motion, no movement when stopped), for stepless positioning, with limit switches, 460V 3PH 60Hz 0.4 HP (0.30 kW) 100 % duty cycle
- Control box with push buttons "turn up/turn down" mounted within easy reach on the handlebar,
- Electronic warning device (horn),
- Bolt Ø of the safety suspension: Ø 25 mm.
- Vacuum filter F3/8 with replaceable cartridge.
- Ø2.5 in vacuum gauge with red/green scale markings to indicate unsafe/safe operation.
- Includes mounting of vacuum generator and motor switch box.
- Spiral cable to connect to hoist power supply.
Suction-pad system (4SPU)
- 4 SPU 360 (14.2 in diameter) suction pads mounted on
crossbeams which can be slid/clamped along the main beam.
Pads for smooth surfaces only.
- Each pad mounted on Flexolink fitting.
- Replaceable non-marking gray rubber seals.
- 4 pad shutoff valves, one per pad.
Main beam/Cross beams (2400/1200)
- Main beam 2400mm, 90x90x2400mm (94.5 in) with mechanical end stops with integrated vacuum reservoir and distributor.
- 2 Cross beams 1200 mm (47.25 in), 40x40x1200mm
Vacuum pump (8-460V)
- Model VE VM-EVE 8D-horiz-460V, 8 m³/h rotary vane pump.
460V/3PH/60 Hz, 0.5 HP (0.37 kW) motor, complete electrical
- On/off motor switch
- Electronic warning device to monitor vacuum pressure during
normal operation. Audible alarm alerts to a low vacuum pressure
and also sounds in the event of a power failure.
Handlebar (300)
- VacuMaster Comfort handle version
- Length = 300 mm (11.8 in)
- Ergonomically integrated control with pushbuttons for chain hoist up/down and vacuum on/off
- Solenoid valve with two-hand operation for vacuum off
Leadtime: 4-6 weeks
002 14.04.01.00144 /0 Electric chain hoist KZG-250-3000-4.8/1.2-460V-AC3/60
Maximum load: 250 kg
Stroke: 3000 mm
Lifting speed (max): 4.8 m/min
Lifting speed (min): 1.2 m/min
Voltage U1: 460V - 3-phase AC
Frequency: 60 Hz
with: VacuMaster Comfort
Type: SKb
Consisting of:
Main body (VMC-250-180)
- 250 kg (550 lb) capacity.
- Robust, lightweight structure for turning loads of max. 2500 mm (98.4") width. Large C-frame with
overall height of 63.6" (1640 mm)
- 180° swivelling module: electric linear cylinder with brake (even motion, no movement when stopped), for stepless positioning, with limit switches, 460V 3PH 60Hz 0.4 HP (0.30 kW) 100 % duty cycle
- Control box with push buttons "turn up/turn down" mounted within easy reach on the handlebar,
- Electronic warning device (horn),
- Bolt Ø of the safety suspension: Ø 25 mm.
- Vacuum filter F3/8 with replaceable cartridge.
- Ø2.5 in vacuum gauge with red/green scale markings to indicate unsafe/safe operation.
- Includes mounting of vacuum generator and motor switch box.
- Spiral cable to connect to hoist power supply.
Suction-pad system (4SPU)
- 4 SPU 360 (14.2 in diameter) suction pads mounted on
crossbeams which can be slid/clamped along the main beam.
Pads for smooth surfaces only.
- Each pad mounted on Flexolink fitting.
- Replaceable non-marking gray rubber seals.
- 4 pad shutoff valves, one per pad.
Main beam/Cross beams (2400/1200)
- Main beam 2400mm, 90x90x2400mm (94.5 in) with mechanical end stops with integrated vacuum reservoir and distributor.
- 2 Cross beams 1200 mm (47.25 in), 40x40x1200mm
Vacuum pump (8-460V)
- Model VE VM-EVE 8D-horiz-460V, 8 m³/h rotary vane pump.
460V/3PH/60 Hz, 0.5 HP (0.37 kW) motor, complete electrical
- On/off motor switch
- Electronic warning device to monitor vacuum pressure during
normal operation. Audible alarm alerts to a low vacuum pressure
and also sounds in the event of a power failure.
Handlebar (300)
- VacuMaster Comfort handle version
- Length = 300 mm (11.8 in)
- Ergonomically integrated control with pushbuttons for chain hoist up/down and vacuum on/off
- Solenoid valve with two-hand operation for vacuum off
Leadtime: 4-6 weeks
002 14.04.01.00144 /0 Electric chain hoist KZG-250-3000-4.8/1.2-460V-AC3/60
Maximum load: 250 kg
Stroke: 3000 mm
Lifting speed (max): 4.8 m/min
Lifting speed (min): 1.2 m/min
Voltage U1: 460V - 3-phase AC
Frequency: 60 Hz
with: VacuMaster Comfort
Type: SKb