Used Stromab, CT 600, CNC Automatic Up-Cut Saw for Angle Cutting. TECHNICAL FEATURES:
Pneumatic up-cut saw with rotating table
Motor Power 10 HP
Blade diameter: 600 mm
Angles available: -70° to 0° to +70°
Angle positioning speed from -45° to +45°: 2 seconds
Angle setting by reading of magnetic strip
Positioning precision: +/- 0.2°
Table rotation by toothed belt
2 vertical pneumatic hold down cylinders
2 horizontal front pressure plates
Gas charged spring lift supports
ELECTRONIC PUSH FEED SYSTEM
Positioning precision +/- 0.4 mm (total of 1/64 “)
Feeding by rack and pinion system; positioning by reading on magnetic strip
Cutting list entered by “Touch Screen”, remote PC via USB port or Ethernet
5 possible optimizing criteria:
Longest size
Limited waste
Priority size
Volume (length x quantity)
Value (profitability)
Working cycle with single list or automatic merging of two or more selected lists combined by lengths having the same section
Graphic description of work-piece
Cutting List Alternatives:
70 Cutting lists with 21 lines per list
3 Cutting lists with 400 lines
CUTTING CAPACITY:
At 0 degrees 160 x 310 mm (6¼” x 12-3/16”), 80 x 390 mm (3-1/8”x 15-5/16”) At 45 degrees 160 x 220 mm (6¼” x 8-5/8”), 80 x 270 mm (3-1/8” x 10-5/8”) At 70 degrees 160 x 100 mm (6¼” x 3-15/16”), 80 x 130 mm (3-1/8”- x 5-1/8”)
Pneumatic up-cut saw with rotating table
Motor Power 10 HP
Blade diameter: 600 mm
Angles available: -70° to 0° to +70°
Angle positioning speed from -45° to +45°: 2 seconds
Angle setting by reading of magnetic strip
Positioning precision: +/- 0.2°
Table rotation by toothed belt
2 vertical pneumatic hold down cylinders
2 horizontal front pressure plates
Gas charged spring lift supports
ELECTRONIC PUSH FEED SYSTEM
Positioning precision +/- 0.4 mm (total of 1/64 “)
Feeding by rack and pinion system; positioning by reading on magnetic strip
Cutting list entered by “Touch Screen”, remote PC via USB port or Ethernet
5 possible optimizing criteria:
Longest size
Limited waste
Priority size
Volume (length x quantity)
Value (profitability)
Working cycle with single list or automatic merging of two or more selected lists combined by lengths having the same section
Graphic description of work-piece
Cutting List Alternatives:
70 Cutting lists with 21 lines per list
3 Cutting lists with 400 lines
CUTTING CAPACITY:
At 0 degrees 160 x 310 mm (6¼” x 12-3/16”), 80 x 390 mm (3-1/8”x 15-5/16”) At 45 degrees 160 x 220 mm (6¼” x 8-5/8”), 80 x 270 mm (3-1/8” x 10-5/8”) At 70 degrees 160 x 100 mm (6¼” x 3-15/16”), 80 x 130 mm (3-1/8”- x 5-1/8”)