The manual milling machine Omec 650-M is utilized to indent dovetails for drawers and various furniture elements. The machine is equipped with a mill spindle which allows cutting of indents of adjustable height. The machine can cut four types of indents with different pitches. The locking and release of the pieces takes place manually by means of pneumatic valves. The controls are realized with a magnetothermic switch that is directly installed on the terminal board of the motor, and lever hand wheels installed at the sides of the machine.
Technical Characteristics
On board machine installed power 0.75 Kw
Working pressure 0.7 MPascal
Spindles 1 N°
Spindle revolutions 16.500 n/1'
Center to center of indents 25-40-50-80 mm
Machine weight 125 kg
Packed machine weight 161 kg
Over-all dimensions 80x72x132 (l x w x h) cm
Packing dimensions 88x140x74 cm
Dimensions, Minimum:
Length 7.87 in (200 mm)
Width 2.36 in (60 mm)
Indent Height .31 in (8 mm)
Front Thickness .27 in (7 mm)
Side Thickness .27 in (7 mm)
Dimensions, Maximum
Length 59.05 in (1500 mm)
Width 16.53 in (420 mm)
Indent Height .70 in (18 mm)
Front Thickness 2.36 in (60 mm)
Side Thickness 1.18 in (30 mm)
Technical Characteristics
On board machine installed power 0.75 Kw
Working pressure 0.7 MPascal
Spindles 1 N°
Spindle revolutions 16.500 n/1'
Center to center of indents 25-40-50-80 mm
Machine weight 125 kg
Packed machine weight 161 kg
Over-all dimensions 80x72x132 (l x w x h) cm
Packing dimensions 88x140x74 cm
Dimensions, Minimum:
Length 7.87 in (200 mm)
Width 2.36 in (60 mm)
Indent Height .31 in (8 mm)
Front Thickness .27 in (7 mm)
Side Thickness .27 in (7 mm)
Dimensions, Maximum
Length 59.05 in (1500 mm)
Width 16.53 in (420 mm)
Indent Height .70 in (18 mm)
Front Thickness 2.36 in (60 mm)
Side Thickness 1.18 in (30 mm)