Omec F9TS Auto Combined Milling Machine, for parallel joints & 45 deg cuts on both sides.
The OMEC F9TS combined milling machine has been designed and built to mill parallel joints on door frames. It is extremely easy to use, with a high-precision and fast work process. The machine uses its milling unit and two cutting units to produce 45° cuts and joints, and can be fitted with an (optional) drilling unit for pre-drilling screw holes. The machine mills the doorposts and top of the frame automatically one-by-one. The automatic cycle blocks, mills, drills and unblocks the pieces to be worked. All the controls are located on a built-in tactile control panel. The F9TS model is controlled by a numeric control, which runs the work cycle. The machine is also available in an oversize version (F9/75TS), which can work door frames up to 350 mm long and 75 mm wide.
Technical Characteristics
On board machine installed power 9.5 Kw
Working pressure 0.7 MPascal
Mill cutter 1 N°
Mill cutter revolutions 5600 n/1'
Blades 2 N°
Blades revolutions 2800 n/1'
Drill bit (Optional) 1 N°
Drill revolutions 2800 N°
Average production of cases 60 n/h
Average production of crosspieces 30 n/h
Average production of a full door frame 25 n/h
Weight of the machine 905 kg
Weight of the machine with package 1000 kg
Overall dimensions 132x160x150 cm
Package dimensions 143x170x175 cm
Dimensional Limits of Workpieces
Minimum
Length: 23.62 in (600 mm)
Width: 2.36 in (60 mm)
Indents Height: .59 in (15 mm)
Case Thickness: .59 in (15 mm)
Crosspiece Thickness: .59 (15 mm)
Maximum
Maximum
Length: 98.42 in (2500 mm)
Width: 11.61 in (295 mm)
Indents Height: 1.96 in (50 mm)
Case Thickness: 1.96 in (50 mm)
Crosspiece Thickness: 1.96 in (50 mm)
The OMEC F9TS combined milling machine has been designed and built to mill parallel joints on door frames. It is extremely easy to use, with a high-precision and fast work process. The machine uses its milling unit and two cutting units to produce 45° cuts and joints, and can be fitted with an (optional) drilling unit for pre-drilling screw holes. The machine mills the doorposts and top of the frame automatically one-by-one. The automatic cycle blocks, mills, drills and unblocks the pieces to be worked. All the controls are located on a built-in tactile control panel. The F9TS model is controlled by a numeric control, which runs the work cycle. The machine is also available in an oversize version (F9/75TS), which can work door frames up to 350 mm long and 75 mm wide.
Technical Characteristics
On board machine installed power 9.5 Kw
Working pressure 0.7 MPascal
Mill cutter 1 N°
Mill cutter revolutions 5600 n/1'
Blades 2 N°
Blades revolutions 2800 n/1'
Drill bit (Optional) 1 N°
Drill revolutions 2800 N°
Average production of cases 60 n/h
Average production of crosspieces 30 n/h
Average production of a full door frame 25 n/h
Weight of the machine 905 kg
Weight of the machine with package 1000 kg
Overall dimensions 132x160x150 cm
Package dimensions 143x170x175 cm
Dimensional Limits of Workpieces
Minimum
Length: 23.62 in (600 mm)
Width: 2.36 in (60 mm)
Indents Height: .59 in (15 mm)
Case Thickness: .59 in (15 mm)
Crosspiece Thickness: .59 (15 mm)
Maximum
Maximum
Length: 98.42 in (2500 mm)
Width: 11.61 in (295 mm)
Indents Height: 1.96 in (50 mm)
Case Thickness: 1.96 in (50 mm)
Crosspiece Thickness: 1.96 in (50 mm)