Equipped with 2, 4 or 6 opposed & staggered Side Heads for sawing/slicing 2 to11 Heads - up to 8" Widths One piece machine frame specially heat treated & stress relieved 1-1/2", 40mm, 1-13/16" or 50mm diameter spindles standard SKF/RHP ABEC 6 precision spindle bearings(STD) throughout (4 per spindle) Saw (vertical shafts) 2800 - 4400 RPM Cutterheads - 6000 RPM Each spindle is driven by individual motors Tables/Fences and Chipbreakers are hard chrome plated Full Cardan Shaft drive with feed speeds up to 82 FPM Top rolls variable pneumatic tensioned Full width bottom driven bedrolls Pneumatic tension top chipbreakers & roll holdovers Easy head adjustment by mechanical digital readouts Dual Digital Readout available for radial setting (NS & Tops) Universal head or rip section optional Safety enclosure serves as chip guard and greatly reduces noise
Working width (at a cutting circle of 125 mm.)
Working height (at a cutting circle of 125 mm.)
Number of spindles, min-max.
Basic motor capacity per spindle
5.5 KW / 7.5HP
Basic motor capacity of feed
4 KW / 5HP
Tool cutting circle (first bottom spindles) min-max.
Saw blade cutting circle (1st right & 1st left vertical spindles) min-max.
Saw blade cutting circle (2nd right & 2nd left vertical spindles) min-max.
Tool cutting circle (top horizontal spindles) min-max.
Tool cutting circle (bottom horizontal spindles) min-max.
Feed speed, infinitely variable by frequency driven motor
Feed roller diameter
Feed roller width
Pneumatic pressure for feed rollers, max.
6 kg/cm² (87psi)
Adjustment range for infeed table and edge-jointing fence
Adjustment range of vertical spindles (axial)
Adjustment range of horizontal spindles (axial)
Length of straightening table
Leadermac Slicermac Moulder for Veneer and Lamello Slicing0100