- Dual Operator allows for Two Operators to Work @ the Same Time @ Full Capacity
- 70 Ton Punch Station (1-1/8" in 3/4")
- For Safety - Keyed Punch Ram
- Throat Depth = 9"
- Punch Gauging Table with Scale and Fence
- 2" Die Insert
- Punch Nut w/ Wrench
- Adjustable Swing-Away Stripper
- One Round Die and Punch: Max. Dia. 1-1/4"
- Punch Jog Control
- Two Adjustable Electric Stroke Controls with Scale
- Two Electric Remote Foot Pedals
- Two 2-Stage Hydraulic Pumps
- Two Valves
- Angle Shear Capacity 6" x 6" x 1/2" at 90°
- Rectangle Notcher 3" x 5" x 3/8" 3" x 4" x 1/2"
- Notcher Table with Guides
- 110 Ton, 24" Bar Shear with Sabre Blade (1" x 6", 3/8" x 24")
- Shear Table with Miter Fence
- Tool Table Work Area
- Slug Receptacles
- Electrical Box Supplied with Emergency Palm Button and Lock-out Tag-out Accommodations
- 230/460 Volt/3 Phase Electrics (must specify voltage)
- All Guards Necessary to Comply with ANSI B 11-5 Standards
- Forklift Accommodations
| Rated on: | 65,000 PSI Tensile |
| Punching Capacity | 70 ton | 1-1/8" in 3/4" |
| Special Tooling | 4" Max. Dia. |
| Throat Depth | 9" |
| Flat Bar Shear (Sabre Blade - Std) | 110 ton | 24" Length | 1" x 6" | 3/4" x 10" | 1/2" x 14" | 3/8" x 24" |
| Angle Shear 90° | 6" x 6" x 1/2" |
| Angle Shear 45° (with Bar Shear) | 3" x 3" x 3/8" | 4" x 4" x 1/2" |
| Brake 12" | 65 ton |
| Brake 24" | 45 ton |
| Open End Brake | Max. 1/4" x 6" Flat or Angle Iron |
| Pipe Notcher Schedule 40 I.D. | 3/4", 1", 1-1/4", 1-1/2", and 2" |
| 90° V. Notcher | 6" x 6" x 5/16" |
| Rectangle Notcher | 3" x 5" x 3/8" | 3" x 4" x 1/2" |
| V. Notch | 3" x 3" x 3/8" |
| Notching in Leg of Channel | 6" to 10" |
| Channel Shear | 2" to 6" Adj. |
| Strut Shear | Samples Required |
| Rod Shear Round Rod (Max.) | 1/4" to 1-1/4", 9 Cav. |
| Rod Shear Square Rod (Max.) | 1/4" to 1", 1 Cav. |
| Picket Tool | 1/2", 3/4", 1", 16 gauge |
| Offset Die Holder | Max. 40 ton |
| Strokes Per Minute in Light Material | 1/4" Stroke [Punch Station] |
| Strokes Per Minute in Heavy Material | 3/4" Stroke [Punch Station] |
| Hydraulics | 3,000/3,000 psi |
| Motors Standard | 10 hp 3 ph 230/460 208/380/575 |
| Motors Optional | 10 hp 1 ph | 230v |
| Dimensions | W-30" L-65" H-72-1/8" |
| Shipping Weight | 3,800 lbs. |
Documentation
Videos
Reviews